# Makefile.in generated by automake 1.9.5 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. srcdir = . top_srcdir = .. pkgdatadir = $(datadir)/libtheora pkglibdir = $(libdir)/libtheora pkgincludedir = $(includedir)/libtheora top_builddir = .. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i686-pc-linux-gnu host_triplet = i686-pc-linux-gnu target_triplet = i686-pc-linux-gnu subdir = doc DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \ $(top_srcdir)/m4/ogg.m4 $(top_srcdir)/m4/pkg.m4 \ $(top_srcdir)/m4/sdl.m4 $(top_srcdir)/m4/vorbis.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = Doxyfile SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(docdir)" docDATA_INSTALL = $(INSTALL_DATA) DATA = $(doc_DATA) ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run aclocal-1.9 ACLOCAL_AMFLAGS = -I m4 AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run tar AR = ar AUTOCONF = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run autoconf AUTOHEADER = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run autoheader AUTOMAKE = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run automake-1.9 AWK = mawk BINDIR = @BINDIR@ BUILDABLE_EXAMPLES = CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -Wall -O3 -fforce-addr -fomit-frame-pointer -finline-functions -funroll-loops CPP = gcc -E CPPFLAGS = CPU_x86_32_FALSE = # CPU_x86_32_TRUE = CPU_x86_64_FALSE = CPU_x86_64_TRUE = # CXX = g++ CXXCPP = /lib/cpp CXXDEPMODE = depmode=none CXXFLAGS = CYGPATH_W = echo DEBUG = -g -Wall -DDEBUG -D__NO_MATH_INLINES DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DOCDIR = @DOCDIR@ ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = grep -E EXEEXT = F77 = FFLAGS = GETOPT_OBJS = HAVE_DOXYGEN = false HAVE_DOXYGEN_FALSE = HAVE_DOXYGEN_TRUE = # HAVE_PKG_CONFIG = yes HAVE_PYTHON = true HAVE_PYTHON_FALSE = # HAVE_PYTHON_TRUE = HAVE_VALGRIND = INCLUDEDIR = @INCLUDEDIR@ INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s LDFLAGS = LIBDIR = @LIBDIR@ LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAINTAINER_MODE_FALSE = MAINTAINER_MODE_TRUE = # MAKEINFO = ${SHELL} /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/missing --run makeinfo OBJEXT = o OGG_CFLAGS = OGG_LIBS = -logg PACKAGE = libtheora PACKAGE_BUGREPORT = PACKAGE_NAME = libtheora PACKAGE_STRING = libtheora 1.0alpha6 PACKAGE_TARNAME = libtheora PACKAGE_VERSION = 1.0alpha6 PATH_SEPARATOR = : PKG_CONFIG = /usr/bin/pkg-config PROFILE = -Wall -pg -g -O3 -fno-inline-functions -DDEBUG RANLIB = ranlib SDL_CFLAGS = SDL_CONFIG = no SDL_LIBS = SET_MAKE = SHELL = /bin/sh SHLIB_VERSION_ARG = -Wl,--version-script=Version_script STRIP = strip THEORA_DISABLE_ENCODE_FALSE = THEORA_DISABLE_ENCODE_TRUE = # THEORA_DISABLE_FLOAT_FALSE = THEORA_DISABLE_FLOAT_TRUE = # VALGRIND_ENVIRONMENT = VERSION = 1.0alpha6 VORBISENC_LIBS = VORBISFILE_LIBS = VORBIS_CFLAGS = VORBIS_LIBS = V_LIB_AGE = 2 V_LIB_CURRENT = 2 V_LIB_REVISION = 0 ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = ac_ct_RANLIB = ranlib ac_ct_STRIP = strip am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__fastdepCXX_FALSE = am__fastdepCXX_TRUE = # am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i686-pc-linux-gnu build_alias = build_cpu = i686 build_os = linux-gnu build_vendor = pc datadir = ${prefix}/share exec_prefix = ${prefix} host = i686-pc-linux-gnu host_alias = host_cpu = i686 host_os = linux-gnu host_vendor = pc includedir = ${prefix}/include infodir = ${prefix}/info install_sh = /home/leonardo/theora/rrf_docs_theora/libtheora-1.0alpha6/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localstatedir = ${prefix}/var mandir = ${prefix}/man mkdir_p = mkdir -p -- oldincludedir = /usr/include prefix = /usr/local program_transform_name = s,x,x, sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com sysconfdir = ${prefix}/etc target = i686-pc-linux-gnu target_alias = target_cpu = i686 target_os = linux-gnu target_vendor = pc SUBDIRS = #python docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION) built_docs = static_docs = vp3-format.txt color.html \ draft-barbato-avt-rtp-theora-00.xml \ draft-barbato-avt-rtp-theora-00.txt doc_DATA = $(built_docs) $(static_docs) doxygen-build.stamp EXTRA_DIST = $(built_docs) $(static_docs) spec Doxyfile.in CLEANFILES = $(built_docs) dist_docdir = $(distdir)/libtheora all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)" @list='$(doc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ rm -f "$(DESTDIR)$(docdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-docDATA install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-docDATA uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ clean clean-generic clean-libtool clean-local clean-recursive \ ctags ctags-recursive dist-hook distclean distclean-generic \ distclean-libtool distclean-recursive distclean-tags distdir \ dvi dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local \ install-docDATA install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-recursive \ mostlyclean mostlyclean-generic mostlyclean-libtool \ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am uninstall-docDATA uninstall-info-am \ uninstall-local #doxygen-build.stamp: Doxyfile $(top_srcdir)/include/theora/*.h # doxygen # touch doxygen-build.stamp doxygen-build.stamp: echo "*** Warning: Doxygen not found; documentation will not be built." touch doxygen-build.stamp dist-hook: if test -d libtheora; then \ mkdir $(dist_docdir); \ echo -n "copying built documenation..."; \ for dir in libtheora/*; do \ b=`basename $$dir`; \ if test $$b != ".svn"; then \ if test -d $$dir; then \ mkdir $(dist_docdir)/$$b; \ for f in $$dir/*; do \ cp -p $$f $(dist_docdir)/$$b; \ done; \ fi; \ fi; \ done; \ echo "OK"; \ fi for item in $(EXTRA_DIST); do \ if test -d $$item; then \ echo -n "cleaning $$item dir for distribution..."; \ rm -rf `find $(distdir)/$$item -name .svn`; \ echo "OK"; \ fi; \ done install-data-local: doxygen-build.stamp $(mkinstalldirs) $(DESTDIR)$(docdir) if test -d libtheora; then \ for dir in libtheora/*; do \ if test -d $$dir; then \ b=`basename $$dir`; \ $(mkinstalldirs) $(DESTDIR)$(docdir)/$$b; \ for f in $$dir/*; do \ $(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$b; \ done \ fi \ done \ fi uninstall-local: rm -rf $(DESTDIR)$(docdir) clean-local: if test -d libtheora; then rm -rf libtheora; fi if test -f doxygen-build.stamp; then rm -f doxygen-build.stamp; fi # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: